TCAN1042DEVM: Should I replace the device on the EVM for the use of 3.3V VIO

Yuhao Zhao

Genius 9820 points

Part Number: TCAN1042DEVM
Other Parts Discussed in Thread: TCAN1042V-Q1

Hi there,

So what is the default device on the TCAN1042DEVM?

If I want to use EVM with 3.3V VIO, should I replace the device with TCAN1042V-Q1?

Thanks,

Yuhao

over 3 years ago

+1 Eric Hackett over 3 years ago

TI__Guru 74292 points

Yuhao,

That is correct, but I would recommend replacing it with the TCAN1044AV-Q1 instead. This device has the same function as TCAN1042V-Q1 and will have better long-term supply.

Regards,

Eric Hackett

0 Yuhao Zhao over 3 years ago in reply to Eric Hackett

TI__Genius 9820 points

Thanks. The reply help me a lot.

Interface

Interface forum

TCAN1042DEVM: Should I replace the device on the EVM for the use of 3.3V VIO