We turned off the CLKOUT PIN pin (REG 0x453=0x6 and REG 0x452 = 0x600) in normal operation mode, and then switched to test mode 1, and found that CLKOUT's 125Mhz clock was lost.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
We turned off the CLKOUT PIN pin (REG 0x453=0x6 and REG 0x452 = 0x600) in normal operation mode, and then switched to test mode 1, and found that CLKOUT's 125Mhz clock was lost.
Hi Yin,
Please remove the writes for 0x453 and 0x452 when using testmode-1. That should get the TX_TCLK clock during testmode-1.
--
Regards,
Gokul.