• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 32 subscribers
  • Views 231 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TUSB8044A: Microsoft®︎ Windows®︎ based EEPROM utility

Akihisa Tamazaki
Genius 11940 points
Part Number: TUSB8044A

Hello team,

My customer has a request and a question about TUSB8044A. Would you please support?

1) My customer would like to get Microsoft® Windows® based EEPROM utility for TUSB8044A.
Would you please send me this utility? My mail address is a-tamazaki@ti.com

2) On 8.5.1 Configuration Registers in the datasheet of TUSB8044A, Address D0h-D4h "Yes, but do not change default" is written. 
In general, EEPROM default value is "1" in all data, so can we consider the default value should be "1"?

Your advice is appreciated.

Best Regards,
Akihisa Tamazaki

  • +1
    TI__Guru**** 166161 points

    Tamazaki-san

    I sent you the EEPROM programming utility and an example file. 

    For the 2nd question, if you look at the example file, 

    D0	1E	00011110	'Reserved, but do not change default
D1	1E	00011110	'Reserved, but do not change default
D2	1E	00011110	'Reserved, but do not change default
D3	1E	00011110	'Reserved, but do not change default
D4	1E	00011110	'Reserved, but do not change default

    Thanks
    David
  • 0 in reply to David (ASIC) Liu
    TI__Genius 11940 points

    David-san,

    Thank you for your support.
    I understood.

    Best Regards,
    Akihisa Tamazaki