subLVDS to LVDS conversion

ACGUY

Other Parts Discussed in Thread: DS90LV804

Hello E2E,

Does TI have any device that able to conversion from subLVDS to LVDS?
I received request from customer that band width more than 1.2Gbps.
With one chip only.

Regards,
ACGUY

over 2 years ago

+1 Ikram Haque over 2 years ago

TI__Mastermind 22990 points

Hi ACGUY,

Could you please give us more information about the application:

- what devices are you using and what is the interface?
- what is the sub-LVDS transmitter specifications? Could you tell us about the number of channels, the peak-to-peak and common modes voltage levels?

According to this E2E forum, the DS90LV804 (or similar LVDS buffers) could be used for this conversion.
https://e2e.ti.com/support/interface-group/interface/f/interface-forum/429143/ds90lv804-use-for-sublvds-application

In some cases, a sub-LVDS transmitter could sufficiently drive a LVDS receiver, and a conversion may not be needed.

Best regards,
Ikram

Interface

Interface forum

subLVDS to LVDS conversion