TPIC8101EVM: TPIC8101EVM doesn't work fine

argini fabrizio

Prodigy 20 points

Part Number: TPIC8101EVM
Other Parts Discussed in Thread: TIGER

The board does not generate any INT/HOLD signal even when i program the GUI according to the instructions.

It would be a firware problem like other users had with this device.

best regards

over 2 years ago

0 John Miller - Sensing over 2 years ago

TI__Mastermind 40295 points

Argini,

I will try to reproduce what you are seeing and will update this thread by Tuesday, March 14th.

Regards,
John

0 John Miller - Sensing over 2 years ago in reply to John Miller - Sensing

TI__Mastermind 40295 points

Argini,

I am working with the EVM now, and to be honest, I'm having problems connecting to the EVM with my computer.
More on this soon....

In the mean-time, what is meant by "The board does not generate any INT/HOLD signal..."?
The pin is an input, not an output.
Do you mean the pin is not being properly set by the micro-controller?

Regards,
John

0 argini fabrizio over 2 years ago in reply to John Miller - Sensing

Prodigy 20 points

Dear John

Yes the signal was not generated by TiGer board. I checked with scope on JP3.

Regards

0 John Miller - Sensing over 2 years ago in reply to argini fabrizio

TI__Mastermind 40295 points

Argini,

Thank you for the add'l info.
I will try to reproduce what you are seeing on my PCB and will update this thread by Friday.

Regards,
John

0 argini fabrizio over 2 years ago in reply to John Miller - Sensing

Prodigy 20 points

Dear John

Maybe these can help you......

https://e2e.ti.com/support/interface-group/interface/f/interface-forum/1135701/tpic8101evm-no-int-clk-generated

https://e2e.ti.com/support/interface-group/interface/f/interface-forum/901885/tpic8101evm-no-int-clk-signals-from-ti-ger-board

https://e2e.ti.com/support/interface-group/interface/f/interface-forum/1031154/tpic8101evm-no-signal-from-int-clk-port

0 argini fabrizio over 2 years ago in reply to argini fabrizio

Prodigy 20 points

Dear John I'm waiting for the firmware just like you told me in the friend's request.

regards

+1 John Miller - Sensing over 2 years ago in reply to argini fabrizio

TI__Mastermind 40295 points

Argini,

You should have received my friend request.
Once you accept it, I can send you the software via private message.
We don't like to distribute software directly on the forums. That is why I am proposing a private message.
If you have not received the invitation, please let me know and I will re-send.

John