• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 33 subscribers
  • Views 372 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

DP83826E: Question about FLD Detection modes by strap.

DP83826E: In EtherCAT Application, 'Signal Energy detect'.

Suyoung Yi
Prodigy 10 points

Part Number: DP83826E

What problems occur when the 'Signal Energy detect' function is enabled in EtherCAT Application?
Do I have to disable the 'signal energy detect' function?

  • 0
    TI__Expert 8771 points

    Hi Suyoung Yi,

    For EtherCAT applications or applications with Fast link drop enabled and expect to handle Baseline wander packets, it is recommended to disable signal energy detect, which can be done by setting Strap8.

    Regards,

    Rahul