TPD1S514: VBUS_PWR Cap

Mike Yu

Intellectual 2320 points

Part Number: TPD1S514

Hi Team,

If the customer are not using the VBUS_PWR out, it is necessary to load the 1uF cap and keep it floating? Thank you.

Best regards,

Mike

over 2 years ago

0 Kuno Wu over 2 years ago

TI__Mastermind 18556 points

Hi Mike,

Nice to see you in the E2E, because the VBUS_PWR is the LDO output, even though you don't use it, for the reliability of LDO, please add 1uF in it. Thank you.

Best Regards,

Kuno

0 Mike Yu over 2 years ago in reply to Kuno Wu

TI__Intellectual 2320 points

Hi Kuno,

Thanks for reply the question.

Best regards,

Mike

0 Kuno Wu over 2 years ago in reply to Mike Yu

TI__Mastermind 18556 points

My pleasure~

Interface

Interface forum

TPD1S514: VBUS_PWR Cap