2 TO 1 MUX for LVDS

Hello Peter,

For your LVDS automotive application I would suggest using the TS5A23157-Q1 which is a 2 to 1 mux. In addition this devices bandwidth is 220Mhz which can support your 60hz input signal.

Here is a helpful e2e that can give more context on this device I suggested.

https://e2e.ti.com/support/switches-multiplexers-group/switches-multiplexers/f/switches-multiplexers-forum/1100298/faq-what-analog-switch-multiplexer-should-i-use-for-lvds-applications

In addition could you answer Clemens question so we can give you the best answer?

Regards

What is the actual bit rate of the LVDS signal? With 83 Mpixels per second, and 24 bits per pixel, this would need at least 2 Gbps, so you would probably need the TMUX136.

Hi Clemens, 

Clemens Ladisch said:

With 83 Mpixels per second, and 24 bits per pixel, this would need at least 2 Gbps, so you would probably need the TMUX136.

Yes, 24 bits per pixel. But I think they need an Q1 device, so I recommend TS5A23157-Q1 to them. Pls tell me if we have other solution.

Regards,

Peter

Hi Kameron,

Thanks for your answer. I already recommend this part to my customer.

Regards,

Peter