DS25BR100: Exchange LVDS lanes

d_zero

Genius 4955 points

Part Number: DS25BR100

Dear Team,

when i'm doing layout can i change the P and N lanes?

eg.

connect the LVDS_IN_P signal to pin 3

connect the LVDS_IN_N signal to pin 2

connect the LVDS_OUT_P signal to pin 6

connect the LVDS_OUT_N signal to pin 7

Best Regards,

over 2 years ago

+1 David (ASIC) Liu over 2 years ago

TI__Guru**** 183591 points

Hi,

If you swap the positive and negative pins at both the input and output, then you maintain the proper polarity and you should be fine with whatever data protocol you are using.

Thanks

David

Interface

Interface forum

DS25BR100: Exchange LVDS lanes