FPC402: FPC402 schematic review and query

Greetings,

1). Please send us a pdf file so we can more easily read the text.

2). At power up outputs are high-z. If your application requires high or low level at power up then you please add weak pull up/down. Otherwise, you can leave them in high-z until this gets re-programmed through your register settings.

3). I have also attached FPC402EVM schematic for your reference as well.FPC401EVM_Schematic.PDF

Regards, Nasser

Hi Nasser,

Kindly find the above image where we have used FPC402 design. Kindly help us in getting it reviewed.

Hi Yeseswini,

Can you please send us a more clear image or pdf files or your schematic. Text and pin numbers are nont clear.

Regards, Nasser

Hi Nasser,

I have attached the document, kindly review and let me know if you have any comments.

Greetings,

I apologize but for some reason i cannot download this pdf file. I go through the authentication but i get the msgs like below and it does not allow me to download this file.  Would it be possible if you could please attach pdf file to this case. Or you can send me private message and send me pdf file.

Regards, Nasser