HI
Voltage in DN1_VBUS and DN2_VBUS 5V .enabled but if plug in USB devises Mouse Or Pen drive not recognized . schematic attached
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
HI
Voltage in DN1_VBUS and DN2_VBUS 5V .enabled but if plug in USB devises Mouse Or Pen drive not recognized . schematic attached
Hi Muralidhara:
I review schematic by today, was hub upstream port working?
Regards
Brian
Hi Brian,
How can i validate Upstream Port is Working.
Regards,
Muralidhara Sullia
Hi Muralidhara:
If you use Windows, you can use USBTREEVIEW tool or device manager to see if any new 2 ports hub show up.
If in Linux, you can check with lsusb to see if any new hub device show up .
Regards
Brian
Hi Muralidhara::
Can you send schematic again with PDF? Hard to see clearly with this one.
Regards
Brian
Please accept my friendship request and then send schematic with private message.
Regards
Brian
Hi Muralidhara:
Can you put mouse on my name and send your schematic with private message?
Regards
Brian
Hi Muralidhara::
Attached is my comment for your schematic, let me know if you any questions about my comments.
Regards
Brian
Thank You Brian . I will Go through Your comments and get back you.
Regards,
Muralidhara
Thank You Brian . Now working . Once again Than you good support.
Regards,
Muralidhara