This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello,
Attached is a block diagram outlining my requirements. I'm in need of a Multiplexer that can handle PCIe Gen4.0 x4 lanes and a SATA 3.0 interface. I am planning to use TMUXHS4412 into my TX and RX lines design. I would greatly appreciate your insights on the suitability of this IC for my needs.
Hi Shifali:
TMUXHS4412 should be the right part for your application. You may need two 4412 mux for 4 lanes.
Regards
Brian
Hi Brian,
I have to support 4 numbers of PCIe Gen4.0 x4 lanes. So I will be using 8 such ICs.
Regards,
Shifali N
ok, when working on schematic, don't leave RSVD pin floating.
Regards
brian