SN65LVCP114: Design issues with chips

Greetings Tony,

Schematic loos fine. 

1). Please note on the input side - CIN0 and CIN1 - we are connected directly to U7B. I am assuming either there is AC coupling Cap integrated within this device. Otherwise please make sure common mode voltage meets LVCP114 requirements.

2). Also, it seems you are using this device as a 1:2 mux. Please note there is another part  DS160PR412- data sheet link below. You can use either part:

https://www.ti.com/lit/ds/symlink/ds160pr412.pdf?ts=1715367793942&ref_url=https%253A%252F%252Fwww.ti.com%252Fproduct%252FDS160PR412

Regards, Nasser