• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 34 subscribers
  • Views 462 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

DS90UB953-Q1: Power Over Coax

DS90UB953-Q1: POC Filter Design

Pranjali Andhare
Intellectual 390 points

Part Number: DS90UB953-Q1
Other Parts Discussed in Thread: DS90UB9702-Q1,

Tool/software:

Hi we are using DS90UB953-Q1 serilaizer with DS90UB9702-Q1 deserializer. Can you please suggest POC network for this configuration

  • 0
    TI__Mastermind 31780 points

    Hello Pranjali,

    For this particular question, it might be best to discuss further in our internal E2E forum. Could you contact your local TI sales office and have them connect you to a local TI FAE? Then, have the TI FAE post this question on your behalf through the internal E2E forum?

    The reason is that the 9702 device is an NDA device. Implementing a PoC network involves talking about our Channel Specifications document and the Insertion Loss and Return Loss requirements of the FPD-Link channel design.

    There is a limit to what I can discuss on a public forum.

    Best,

    Justin Phan

  • 0 in reply to Justin Phan
    Intellectual 390 points

    Hello Justin,

    Thanks for your reply. I will check with local TI sales