Tool/software:
How much current can the LED_1 and LED_0 pins sink using the onchip LED driver.
Is 33 mA acceptable on LED_1 plus another 33 mA on LED_0?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Frank,
We do not have the exact information for LED current sink, however we have validated that DP83822 can drive below LED on DP83822EVM:
https://mm.digikey.com/Volume0/opasdata/d220001/medias/docus/655/QTLP630-2.pdf
Hope this helps.
Thank you,
Evan