Tool/software:
The data sheet doesn't provide any thermal parameters to model the package. Please advise on how to predict temperatures.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
Is the following parameter you are looking for:
--
Regards,
Hillman Lin
Hi Hillman,
Thanks for the response. Yes, its one of the parameters I was looking for. I would be needing other parameters too such as Tj-c, Tjb. Even better if we couild get ψ (jt) and ψ (jb). Below are these values for a different TI package.
Thanks,
Darshan
Hi,
We only have the information for Tj. Here is another E2E that share the information:
If other information is required. we might need sometime to dig through the detail
--
Regards,
Hillman Lin
Hi,
Not sure if we have it but I will check with the team and provide you a response later.
--
Regards,
Hillman Lin
Hi Darshan,
I request for the remaining temperature rating internally and here is the remaining temperature rating:
--
Regards,
Hillman Lin