TPD1E10B06: TPD1E10B06DPYR

Gustavo Perez

Part Number: TPD1E10B06

Tool/software:

Hi, Can you please help me know if the A5 marking is the correct data for the mentioned component?

We have received material with A5 marking, so we have validated with specification and it shows that the markings should be (B1, B2, B6, BI).

I appreciate your support and prompt response.

Thank you,

11 months ago

0 Sebastian Muriel 11 months ago

TI__Mastermind 18520 points

Hi Gustavo,

This is a known issue where some material in the ‘DPY’ package coming out a certain assmebly site was incorrectly marked with A5 instead of the marking seen in the data sheet, and a recent audit has confirmed this. The parts received will match the shipping label sent to Sanmina and performance will not be impacted.

The A/T site has already worked to resolve this error, but the incorrectly marked material may be seen until the affected material makes its way through the system. These are the correct units and performance will not be affected.

Regards,

Sebastian

0 Chris Conner 11 months ago in reply to Sebastian Muriel

Prodigy 20 points

Has there been any official SCN or customer notification on this issue? I need to have a copy of it for records before I can move forward with using them on product.