This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
Hi team . I'm using TS3DV642-Q1 mipi switch in my project ,where the sensor connected with A lane outputs 4lane mipi csi-2 data and sensor connected with B lane outputs 2 lane mipi csi-2 data .So the mipi data lane 2 and lane 3 are'nt required. So should i leave the pin floating or it should be terminated .
Hi,
Either option is ok.
I recommend pulling down the pins so there is no chance of crosstalk between lanes.