This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS320PR810-SMP-EVM: RSVD2/3/4/5 pin connection

Part Number: DS320PR810-SMP-EVM

Tool/software:

Why are the RSVD2/3/4/5 pin connections different between the DS320PR810-SMP-EVM schematic and data sheet?

DS320PR810-SMP-EVM_sch

datashhet

  • Hello,

    At the time of this board's design, the 0.1uF capacitors were the recommendation for connecting these pins to ground. However, this was updated upon release of this device.

    Please follow the current data sheet's guidelines for connecting RSVD 2,3,4,5 to ground directly or through a 0 Ohm capacitor.

    Best,
    David