• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 34 subscribers
  • Views 264 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN65DSI83-Q1: Whether the DSI recovers automatically after a failure.

Alan Xia
Genius 11210 points

Part Number: SN65DSI83-Q1
Other Parts Discussed in Thread: SN65DSI83

Tool/software:

Hi team，

Harman do a test that short the LVDS bridge input lane(MIPI-DSI) to ground ,the display will blank ,then i remove the short but the display not recovery auto, the DSI signal from SOC side output normally , so i want to know the SN65DSI83 if including the recovery mechianism  after reomve the error at dsi input .