Tool/software:
Hi TI experts,
I am using the DS90UB927Q/928Q SerDes pair in my design.
Is there a specific cable requirement (e.g., return loss or insertion loss) for the DS90UB928Q-Q1?
I could not find the related information in the DS90UB928Q-Q1 documentation and would like to know if there is guidance similar to the case discussed here:
https://e2e.ti.com/support/interface-group/interface/f/interface-forum/642590/ds90ub954-q1-coax-cable-return-loss-and-insertion-loss-requirement
In my application, the pixel clock is approximately 64 MHz, and the FPD-Link bit rate is calculated to be 2.24 Gbps.
Could you provide the required cable return loss and insertion loss parameters based on my scenario?
