Tool/software:
Hello, I have the following questions and would appreciate your answers.
I get the following error when I confugue to TPLD801 in Interconnect Studio.
I have tried plugging it back in several times, but the error persists. Please let me know how I can get out of this situation. I have checked the operation with the device that was installed at the time of purchase EVM Evaluation Module and first Permanently Configure worked fine. After inserting the second device, this phenomenon is occurring.
The error message is as follows.
Oh Snap! The last change caused an exception...
"Incorrect device ID Read. Please check the device is seated correctly, and that the device selected matches the device in socket."
