FPC402: FPC402 Sch Review

Dilip Namdeo Mohol

Intellectual 2000 points

Part Number: FPC402

Tool/software:

Team,

One of my customer is using the FPC402RHUR for SFP28 interface, please review the attached schematic and provide your feedback.

Please Note:

This is a hierarchical based schematic (1^st page is the top level block and following pages represent actual schematic).
Due to hierarchy few net names will be same, but in actual netlist they will be different.
Please select and search the net name instead of clicking on it. Clicking may not go to the connected device as it schematic is extracted from full design.

Phoebe_8T8R_SFP_20250505.pdf

4 months ago

0 Drew Miller1 4 months ago

TI__Mastermind 36543 points

Hi Dilip,

We're reviewing this and will get back to you shortly.

Thanks,

Drew

0 Drew Miller1 4 months ago in reply to Drew Miller1

TI__Mastermind 36543 points

Hi Dilip,

I reviewed the schematic, please see my attached feedback.

One other comment is that if multiple FPC402s were being implemented, I think that SET_ADDR_N and ADDR_DONE_N should be brought out to the top level block of the hierarchical schematic. Since only one FPC402 is being implemented, keeping this internal is alright.

3348.Schematic Review.pdf

Do you have PPM information for this project?

Thanks,

Drew

Interface

Interface forum

FPC402: FPC402 Sch Review