• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 70 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

Redriver for FPD LINK-III (We are using DS90UB948 & DS90UB947)

DS30BA101: Redriver for FPD LINK-III with back-channel communication

Nikunj Mehta
Prodigy 170 points
Part Number: DS30BA101
Other Parts Discussed in Thread: DS80EP100

Tool/software:

Dear Team,

https://e2e.ti.com/support/interface-group/interface/f/interface-forum/538679/redriver-for-fpd-link-iii-we-are-using-ds90ub948-ds90ub947

i refer above thread , is there any Redriver for FPD LINK avalabl with back channel support ? 

Regards,

Nikunj

  • +1
    TI__Mastermind 36123 points

    Hi Nikunj,

    We don't have redriver devices available with back channel support.

    I'm not too familiar with FPD link protocol and TX/RX design, but perhaps DS30EP100 or DS80EP100 could be considered.  These are passive equalizers that support bi-directional operation.

    Thanks,

    Drew