TPD1E1B04: TPD1E1B04DPYR: Different marking information with D/S

Junichi Komura

Part Number: TPD1E1B04

Tool/software:

Hi team,

In April of this year, we delivered a lot with date code 2438, which had "A5" marking.

We were able to proceed with the delivery by sharing the information from this thread in response to the customer's inquiry.
At that time, thier end customer requests information regarding the period during which lots with this different marking (A5) were produced.

So could you please provide the initial date code when this marking started?
Also, if there are any differences depending on the assembly site, please let us know.

J.Komura.

9 months ago

0 Josh Prushing 9 months ago

TI__Expert 8745 points

Hi Junichi,

Please see the following FAQ on A5 markings: [FAQ] Device Mismarked with A5

Please let me know if you still have additional questions.

Best Regards,

Josh Prushing

0 Junichi Komura 9 months ago in reply to Josh Prushing

Prodigy 250 points

Josh -san,

Thank you very much for your reply.
The FAQ you kindly provided includes the date of improvement (November 17, 2024), but does not mention the date of occurrence (starting point). Could you please share that information with us?
Additionally, if this applies only to a specific assembly site, we would appreciate it if you could let us know which site it is.

Thanks again and best regards,

J.Komura.

0 Josh Prushing 9 months ago in reply to Junichi Komura

TI__Expert 8745 points

Hi Junichi,

Please send me an email at j-prushing1@ti.com with your request. I will provide information for you there.

If you have any further questions, let us continue over email thread.

Best Regards,

Josh Prushing

Interface

Interface forum

TPD1E1B04: TPD1E1B04DPYR: Different marking information with D/S