DS125DF410 EVM driver for Windows7

masahiko shimizu

Other Parts Discussed in Thread: DS125DF410, DS125DF410EVM, ALP

My suctomer will use EVM for DS125DF410.
They can only use versions of Windows later than XP.
and Microsoft support of XP has finished.

- Could you let me know information about EVM USB Driver for Windows7?
　　->Under development?
- Could you give me a EVM Driver for Windows7?

Best regards
Shimizu

over 10 years ago

0 Michael Lu (Santa Clara) over 10 years ago

TI__Mastermind 29655 points

Hi Shimizu-san,

There is currently no future development planned to migrate the DS125DF410EVM Analog LaunchPad GUI to operate in Windows 7.

Please refer to the following post for how to use Windows XP Mode to run ALP in Windows 7:

http://e2e.ti.com/support/interface/high_speed_interface/f/138/t/263731.aspx

Additionally, you are welcome to reference the following document to get ALP up and running in Windows 7. Drivers are included in the executable installation:

2451.ALP_on_Windows7.pdf

Thanks,

Michael

0 Michael Lu (Santa Clara) over 10 years ago in reply to Michael Lu (Santa Clara)

TI__Mastermind 29655 points

Hi Shimizu-san,

As an addition to my comments above, I would like to mention that we are currently planning to update our signal conditioning EVM software from ALP to a LabView based GUI. This will make our EVM software fully functional and compatible in Windows 7. Currently, we are working on the DF1610 redesign. Once completed, this design will be replicated for the DF410 and DF111 products.

Thanks,

Michael

0 masahiko shimizu over 10 years ago in reply to Michael Lu (Santa Clara)

Guru 11235 points

Hi Michael-san

Thank you for your support.

Could you let me know the new GUI for DF410 schedule?

Best regards,

Shimizu

0 masahiko shimizu over 10 years ago in reply to Michael Lu (Santa Clara)

Guru 11235 points

Hi Michael-san

Thank you for your support.

My customer can't use Launch Microsoft XP Mode for my customer's company Rule.

I inform the present information.

Best regards,

Shimizu

0 Michael Lu (Santa Clara) over 10 years ago in reply to masahiko shimizu

TI__Mastermind 29655 points

Hi Shimizu-san,

Right now, we do not have a definite expected date for when DF410 GUI will be available publicly.

Thanks,

Michael

0 masahiko shimizu over 10 years ago in reply to Michael Lu (Santa Clara)

Guru 11235 points

Hi Michael-san

Thank you for your support.

I understood.

Best regards,

Shimizu

Interface

Interface forum

DS125DF410 EVM driver for Windows7