DS90UB954-Q1EVM: Need profiles and scripts with DS90UB954/953-Q1 EVM

Paul,
Please refer to the following E2E threads for the relevant information:
e2e.ti.com/.../638383
e2e.ti.com/.../647512
e2e.ti.com/.../677666

I can see much discussion about these files in those links but no indication as to where I can access them.

There is a comment that some of the files are not necessary dependent on EVM revision. I have a submitted a query as to how to determine the revision of the EVM. I see no indication on the pcb.

In one of the posts there is an attached file (e2e.ti.com/.../954_5F00_953_5F00_sensor_5F00_setup.txt). This appears to be a framework which needs to be expanded as required.

Can you please clarify - if the files requested and listed in EVM User Guide are available or necessary OR if the only support file that is available is the framework file above?

Thanks
Paul

Yes, the sensor setup file you referenced to provides a generic framework to initialize the imager.
We can provide you a copy of the OVT imager initialization script (and other scripts referenced in the EVM user guide) offline if you can provide me your email address (or send a friendship request through E2E), but you would normally need to work with the imager vendor to make sure everything is set up correctly for the imager.