• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 402 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

SN65DSI86: Color bar can display, but MIPI source can't display

SN65DSI86: Color bar can display, but MIPI source can't display.

Bruce Lin_899
Intellectual 870 points
Part Number: SN65DSI86

Dear TIer

Hi, I had ask this question yesterday and reply EDID for Marlik.

For now I read 0xF0 = 0x04, 0xF1 = 0xAB, 0xF5 = 0x22, do you have any suggestion about those err status?

Costomer use QC SDM450 main chip and DSI(MIPI) output. 

BR

Bruce 

  • 0
    TI__Guru 64326 points

    Bruce,

    Could you post a block diagram of the application? This will help debugging some of the errors found in the 0xF0-FF registers.

    It seems you are possibly having issues with noise feeding into DSI86. Could you specify under what condition these errors occur?