DS90UB953-Q1: Schematic Review Request

user5861838

Part Number: DS90UB953-Q1

Dears ,

Could you help to review my schematic of DS90UB953TRHBRQ1 and DS90UB954TRGZRQ1 , please check attach files for schematic details . Thanks ! T3-6页-V1.0.pdf T3-7page-V1.0.pdf

over 7 years ago

0 Vijaya Ceekala over 7 years ago

TI__Intellectual 2930 points

Hello
Are you OK with having the schematic in a public forum? Please note that if this schematic is a confidential customer schematic, you may need to work with a TI Sales/FAE person to have the schematic reviewed without going through a public forum. We will have feedback on this forum within 1 week by Nov.29

Regards
Vijay

0 user5861838 over 7 years ago in reply to Vijaya Ceekala

Prodigy 30 points

Hello
Please don't share the schematic in a public forum . Thanks !

0 user5861838 over 7 years ago in reply to user5861838

Prodigy 30 points

Add DS90UB953、954 schematic . T3-DS90UB953-V1.0.pdf 2630.T3-DS90UB954-V1.0.pdf

0 Steven(Shenzhen) Shi over 7 years ago in reply to user5861838

TI__Mastermind 30515 points

Hi,
this is one public forum. pls be careful of the sch. attached here, as mentioned, you can work with TI local team for it.
meanwhile, you can refer to TI's EVM board refer design and TIDesign which has sch./layout on UB953-based camera module design published in www.ti.com, you can visit this website for more information. TI recommends you can refer to these designs, if you still have concerns, please let's know.
if reviewing your sch. most are good as you follow up TI's reference design, additional points are:
1. for ub954, please be careful of the VDD11_D/CSI/FPD0/FPD1 pins filtering design, you can add more 0.01uf cap in each pin. also, please note the referred POC voltage is ~9V for better stability.
2. sorry we don't see the ub953 in your thread.

regards,
Steven

Interface

Interface forum

DS90UB953-Q1: Schematic Review Request