This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Linux/TUSB9261: TUSB9261 can not attach SATA HDD

Part Number: TUSB9261
Other Parts Discussed in Thread: TUSB9260

Tool/software: Linux

Hi,

We are using TUSB9261 with SATA ,  linux can recognize TUSB9261 but storage is not show up.

Could you give some advise how to debug ?

[ 825.729409] usb 1-1: new high-speed USB device number 6 using xhci-hcd
[ 825.883095] usb 1-1: New USB device found, idVendor=0451, idProduct=926b
[ 825.883140] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 825.883181] usb 1-1: Product: TUSB9260 Boot Loader
[ 825.883222] usb 1-1: Manufacturer: Texas Instruments
[ 825.883261] usb 1-1: SerialNumber: TUSB9260BL01

Best,

Andy

  • Hi Andy,

    Based on your Product ID and Product Name, I believe could be a firmware issue. Do you have the latest firmware installed on the TUSB9261?



    Regards,
  • Hi Nicholaus,
    Thanks for your reply.
    We re-program the firmware and it works perfect.

    [ 213.169362] usb 1-1: new high-speed USB device number 4 using xhci-hcd
    [ 213.344383] usb 1-1: New USB device found, idVendor=0451, idProduct=9261
    [ 213.344459] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [ 213.344527] usb 1-1: Product: TUSB9261 USB3.0 to SATA Bridge
    [ 213.344593] usb 1-1: Manufacturer: Texas Instruments
    [ 213.344659] usb 1-1: SerialNumber: 76D5E549DF428770202836107848A4EA6
    [ 213.375856] usb-storage 1-1:1.0: USB Mass Storage device detected
    [ 213.381120] scsi host1: usb-storage 1-1:1.0

    Thanks.


    Best,
    Andy