TS3USB3000: Inquiry for T&R Information on datasheet

user3480605

Part Number: TS3USB3000

Hi,

Looking into the datasheet for TS3USB3000, It seems that there is two T&R Information as below.

I found that difference of those is the point highlighted, but seeing it, does it mean that we cannot know which Pin 1 Quadrant will be shipped from TI if we choose the TS3USB3000RSER (without "M" version)?

Please your advice, thanks.

over 6 years ago

0 David (ASIC) Liu over 6 years ago

TI__Guru**** 183801 points

Daisuke-san

Difference between M and non-M is the parts are oriented in a different direction in the tape and reel.

Thanks
David

0 user3480605 over 6 years ago in reply to David (ASIC) Liu

Prodigy 40 points

Hi Davis san,

Thanks for your reply.

I've already checked another thread and found the difference you mentioned.

But, on the datasheet (SCDS337E), there is two pages of T&R information. (page 22 and 24.)

One shows that Pin1 Quadrant of TS3USB3000RSER (non-M) is Q3, and another shows it is Q1.

How should I understand this?

0 David (ASIC) Liu over 6 years ago in reply to user3480605

TI__Guru**** 183801 points

Daisuke-san

We are checking this internally and will get back to you.

Thanks
David

0 David (ASIC) Liu over 6 years ago in reply to David (ASIC) Liu

TI__Guru**** 183801 points

Daisuke-san

Info on page 24 is correct, we need to update the datasheet.

Thanks
David

0 user3480605 over 6 years ago in reply to David (ASIC) Liu

Prodigy 40 points

David san,

Thank you for your confirmation, understood.

Best regards,

Daisuke Tazaki

Interface

Interface forum

TS3USB3000: Inquiry for T&R Information on datasheet