DS90UB954-Q1: will back channel frequency settings affect line concatenation

martin DONAGHY

Intellectual 540 points

Part Number: DS90UB954-Q1

To get range on STP we run 2 x 1080p YUV422 sensors with 0x58 set to 0x5d in the deserialiser ports 0 and 1.

can this affect the synchronised line concatenation mode?

We are trying to merge the images into 1 stream at 3840 x 1080.

over 6 years ago

0 Steven(Shenzhen) Shi over 6 years ago

TI__Mastermind 30515 points

Hello,

Yes, it could be. but pls refer to d/s page51 (http://www.ti.com/lit/ds/symlink/ds90ub954-q1.pdf

The forwarding engine for the CSI-2 Transmitter can be configured to synchronize both video sources. Requirements:
• Video arriving at input ports should be synchronized within approximately one video line period
• All enabled ports should have valid, synchronized video
• Each port must have identical video parameters, including number and size of video lines, presence of synchronization packets, and so forth.

best rgds,

Steven

Interface

Interface forum

DS90UB954-Q1: will back channel frequency settings affect line concatenation