SN75DP139: Can it support baytrail J1900

Vincent Chen64988

Expert 4480 points

Part Number: SN75DP139
Other Parts Discussed in Thread: SN75DP130

Hi Team,

My customer is asking can SN75DP139 as a redriver between baytrail J1900(CPU) and a HDMI monitor?

If it can support this kind of application, could team help to review the SCH?

hdmi_SCH.pdf

Thanks very much.

Vincent Chen

over 6 years ago

0 David (ASIC) Liu over 6 years ago

TI__Guru**** 187841 points

Vincent

Please see my response to this e2e thread: https://e2e.ti.com/support/interface/f/138/t/865006.

Could you please confirm that the DDI followed the DP or the DP++ standard?

Thanks

David

0 Vincent Chen64988 over 6 years ago in reply to David (ASIC) Liu

TI__Expert 4480 points

Hi David,

Customer replied baytrail J1900 CPU can be set to either DP or HDMI interface, in this project it is set to HDMI interface. Can SN75DP130 support this kind condition? If not, is there any better suggestion?

Thanks a lot.

Vincent Chen

0 David (ASIC) Liu over 6 years ago in reply to Vincent Chen64988

TI__Guru**** 187841 points

Support through direct email.

Thanks

David

Interface

Interface forum

SN75DP139: Can it support baytrail J1900