SN65LVCP1414: Need help with simulation models

Ethan Galloway

Part Number: SN65LVCP1414

In the s4p files, which ports are the inputs and outputs?

Is there a place I can look for more information on the models?

over 5 years ago

0 Lee Sledjeski over 5 years ago

TI__Mastermind 43795 points

Hi Ethan,

Here is the model TI_SN65LVCP114_AMI_users_guide.pdfUser Guide

For the RX_PKG ports 1/2 are inputs and 3/4 are the outputs.

For the RX_TERM ports 1/2 are the inputs and 3/4 are the outputs

For the TX_PKG ports 1/2 are the inputs and 3/4 are the outputs

So the simulation would connect TX -> Channel -> RX_PKG -> RX_TERM -> LVCP114 IBIS -> TX_PKG -> Channel -> RX

Regards,

Lee

0 Ethan Galloway over 5 years ago in reply to Lee Sledjeski

TI__Mastermind 31085 points

Thanks Lee,

I have another question.

If I'm using ADS, what component would I use for the IBIS file?

ADS can't put the IBIS file into the ReDriver_AMI or the Tx_AMI. The IBIS file can only be used for the Rx_AMI component.

Ethan

0 Lee Sledjeski over 5 years ago in reply to Ethan Galloway

TI__Mastermind 43795 points

Hi Ethan,

You are correct I will look further into this model.

Regards,

Lee

0 Lee Sledjeski over 5 years ago in reply to Lee Sledjeski

TI__Mastermind 43795 points

Hi Ethan,

Yes, this is a relative older and limited AMI model. It only includes the Rx AMI information so it can only be used as an RX_AMI component.

Regards,

Lee

0 Ethan Galloway over 5 years ago in reply to Lee Sledjeski

TI__Mastermind 31085 points

Thanks, that answers my question.

Ethan Galloway

Interface

Interface forum

SN65LVCP1414: Need help with simulation models