TUSB422: Problem when bringup TUSB422

Duan Nguyen

Prodigy 20 points

Part Number: TUSB422

Dear TI,

I'm adding TUSB422 source code to our project but there is a error as below

usb_pd_pal.c:22:10: fatal error: 'huawei_platform/usb/hw_pd_dev.h' file not found

Why your sources need the header file from Huawei ? could you provide the header file in common include folder?

Thanks and BRs

over 4 years ago

0 Malik Barton57 over 4 years ago

TI__Guru 64326 points

Hi Duan,

I am looking into this and will get back to you as soon as possible.

0 Malik Barton57 over 4 years ago in reply to Malik Barton57

TI__Guru 64326 points

Hi Duan,

This is a holdover from previous project and specific to Huawei. A platform abstraction is required and an example for a Huawei platform is included. You will need to should create your own header and modify the PAL to call those specific functions.

0 Duan Nguyen over 4 years ago in reply to Malik Barton57

Prodigy 20 points

Dear TI

Do you have your own codes (before adding the Huawei source) ?

Thanks and Brs

0 Malik Barton57 over 4 years ago in reply to Duan Nguyen

TI__Guru 64326 points

Hi Duan,

No source code here as the PAL will be specific for each system and should be developed by the customer.

Interface

Interface forum

TUSB422: Problem when bringup TUSB422