DS90LV001: HOW do I define the eye diagram model for DS90LV001‘s input

Teck

Part Number: DS90LV001

HI，Friend，

I want to define eye diagram model to test the LVDS signal quality of DS90LV001‘s input ,but I don't find

relative data from DS90LV001‘s datasheet,such as jitter, rise time,fall time,and so on.So, Can give me a favor for this operation?

THANKS,

Teck

over 4 years ago

0 Ikechukwu Anyiam over 4 years ago

TI__Mastermind 35130 points

Hi Teck,

Simple LVDS devices typically don't have eye diagram models. For most devices you'll typically want to see a minimum of 100mV vertical eye opening and around 0.75 UI horizontal eye opening. You can reference this application note for an example: https://www.ti.com/lit/an/slaa844/slaa844.pdf

Regards,

I.K.

Interface

Interface forum

DS90LV001: HOW do I define the eye diagram model for DS90LV001‘s input