Part Number: DP83TC813R-Q1
What should be the state of RESET_N be during DP83TC813's power-up sequence?
The state of RESET_N during the DP83TC813's power-up sequence generally does not matter and will not affect PHY functionality. However, if any…
Part Number: TMS570LS3137 Other Parts Discussed in Thread: HALCOGEN , , UNIFLASH
In this thread i am going to explain step by step procedure for AJSM locking and unlocking for Hercules Microcontrollers.
Part Number: TDA4VH-Q1 Other Parts Discussed in Thread: TDA4VM , TDA4VL , TDA4VH
In TDA4VH, TDA4VM and TDA4VL, by default GPIO has bank architecture when it comes to interrupt. This below guide explains how to enable the line interrupt.
Part Number: AM625 Other Parts Discussed in Thread: AM62P , AM62L
Hello, I am using a low power mode on an AM62 Family device including AM62x, AM62P, AM62A, AM62D and AM62L. What are some steps to debugging why the low power modes is not working as…
Part Number: TAS2120
When driving high-inductance actuators, the phase shift of current and voltage in the load can cause reverse-current issues triggering Class-D amplifier protection schemes such as over-current and over-voltage.
The attached spreadsheet…
Part Number: TDA4VH-Q1 Other Parts Discussed in Thread: TDA4VH
The MDIO pins and the data pins routed to PHY are from different instances of CPSW due to Hawdware constrain or referencing by mistakenly, How to address this issue and possibility for using…
Part Number: TMS320F28P550SJ Other Parts Discussed in Thread: SYSCONFIG , C2000WARE
Hello,
Please check out the debugging steps for some of the common issues users face while using TI's peripheral and device configuration tool - SysConfig.
Thanks…
Part Number: AM4372 Other Parts Discussed in Thread: TPS65218 , TPS65218D0 , TPS65910 , TPS65217 , TPS650250 , TPS6521825 , TPS6521815 , TMDXEVM438X-EPOS , TMDSEVM437X , AM5728 , AM4378
Hi TI Experts,
I am working on a design using AM437x or AM438x…
