• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 15 subscribers
  • Views 212 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ISO7041-Q1: Recommends 300Ω series registers

Kenji Ohno1
Genius 5095 points
Part Number: ISO7041-Q1
Other Parts Discussed in Thread: ISO7041

Hi Team,

My customer is replacing ISO7041 with ISO7041-Q1.

ISO7041-Q1 recommends 300Ω series registers for INAA/B/C/D, and OUTA/B/C/D.

What is the reason for this?

What problems can occur if different values are not used?

Regards,

Kenji

  • 0
    TI__Genius 12935 points

    Hello Kenji,

    Thank you for your question. The 300Ω series resistors are a typical use case for automotive BMS applications. If the your are using this part for industrial purposes, these resistors are optional and may not be needed in your application.

    I hope this helps. Please follow up if you have more questions.

    Best,

    Andrew