• State Resolved
  • Locked Locked
  • Replies 4 replies
  • Answers 1 answer
  • Subscribers 15 subscribers
  • Views 201 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN6507: Gate Driver Bias power

Brian Wang0928
Genius 12290 points
Part Number: SN6507
Other Parts Discussed in Thread: TPS54308, SN6501

Is there reference design for gate driver bias power? It should have 3 - 4 output windings on the transformer. 

The output voltage would be +15V/-5V for each rail. Thanks. 

Regards

Brian

  • 0
    TI__Guru 52660 points

    Hi Brian,

    I am not aware of any reference designs with 3 to 4 outputs with each one being ±15V. Since SN6507 is an open-loop push-pull transformer driver, having 3 to 4 output windings might not be the best way to generate multiple rails. It is best to keep a separate SN6507 for each ±15V output to position the power supply close to the gate driver. Alternatively, you could have 2 or 3 transformers driven by same SN6507 provided they are located close to the device.

    Let me know if you have any other questions, thanks.


    Regards,
    Koteshwar Rao

  • 0 in reply to Koteshwar Rao
    TI__Genius 12290 points

    Thanks. Since customer is now using TPS54308 with Flybuck scheme, it is able to generate multiple outputs for bias power of inverter. Cost is a concern. 
    We are just thinking how to position  SN6507 to replace it.

    Is SN6507 positioning in communication iso power not bias power of gate driver on inverter , right? 

  • +1 in reply to Brian Wang0928
    TI__Guru 52660 points

    Hi Brian,

    Customer can still use a transformer with 3 to 4 output windings connected to SN6507 but we currently do not have a reference design or a transformer to recommend. If customer can work with a transformer vendor to have push-pull transformer with 3 to 4 windings, then SN6507 should still work.

    The output voltage might not be as tightly regulated as TPS54308 but I believe Gate Drive applications can work with such outputs.

    If customer doesn't all the features of SN6507 then they could use SN6501/SN6505 to drive multiple smaller transformers and it could still be cost-effective. Let me know if either of the options work for customer, thanks.


    Regards,
    Koteshwar Rao

  • 0 in reply to Koteshwar Rao
    TI__Genius 12290 points

    got it. Very thanks for feedback.