ISO3088: Reliabilty FIT data for this device

Vincent Bartlett

Part Number: ISO3088
Other Parts Discussed in Thread: ISO1540, ISO1050

Hello,

My company is doing a product MTBF for a product launch of our solar inverter, and I was looking for the FITs rate for the ISO3088, ISO1050, ISO1540.

I went to the reliability database which has most parts, but these devices do not have any data.

over 6 years ago

0 Anand Reghunathan over 6 years ago

TI__Intellectual 2900 points

Hi Vince,

We will check this data internally and get back to you at the earliest.
Thank you.

Regards,
Anand Reghunathan

0 Anand Reghunathan over 6 years ago

TI__Intellectual 2900 points

Hi Vince,

Please find the data below. Let me know if anything else is required.
ISO3088: 0.8
ISO1050: 0.6
ISO1540: 0.4

Regards,
Anand Reghunathan

0 Vincent Bartlett over 6 years ago in reply to Anand Reghunathan

Prodigy 30 points

Dear Mr. Anand Reghunathan,

Thank you can you add this following data so we can adjust the FIT data to our system which might or might not be at a higher temperature.

Also the confidence rate will help since we use 90% rate which we can convert from a lower confidence rate

ISO3088: 0.8 operating temp C =, Confidence level = 60%, 90%?
ISO1050: 0.6 operating temp C =, Confidence level = 60%, 90%?
ISO1540: 0.4 operating temp C =, Confidence level = 60%, 90%?

0 Anand Reghunathan over 6 years ago in reply to Vincent Bartlett

TI__Intellectual 2900 points

Hi Vince,

For all three parts
Operating Tempearture = 55C
Activation Energy = 0.7eV
Confidence Interval = 60%

Hope this helps.

Regards,
Anand Reghunathan

0 Vincent Bartlett over 6 years ago in reply to Anand Reghunathan

Prodigy 30 points

Thanks that's what we needed

Isolation

Isolation forum

ISO3088: Reliabilty FIT data for this device