CCS/MSP430F6459-HIREL: CRC

Trupti,
I am uncertain of the best method, and this may vary based on your implementation.
However, there are various resources available to you.
One solution uses the linker to create a CRC table. See this blog post for more information.
e2e.ti.com/.../from-the-experts-perform-cyclic-redundancy-checking-using-linker-generated-crc-tables

Additionally, there is code example comparing software calculation and hardware CRC calculation in the MSPware tools.

e2e.ti.com/.../614660

Additionally there is a section on the CRC hardware in the family users guide that you have likely seen.
www.ti.com/.../slau367

If this answers your question, please click "This Resolved My Question"
Regards,
Wade