This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Dear teams,
My customer is using SN74AUP1G125. They used MCU to give clk signal to the SN74AUP1G125. They found the output has some ringing. Could you help give some suggestions here? Here is the schematic diagram and waveform.
Thanks!
Dylan
Hi Dylan,
What's the load at the output of our device? We don't recommend driving loads larger than 70pF.
Also can we see the PCB layout?
Regards,
Sebastian
Hi Sebastian,
Thanks a lot for your reply! This issue has been resolved.
Thanks!
Dylan