This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN74LVC1G08: Input transition rise or fall rate requirment

Part Number: SN74LVC1G08
Other Parts Discussed in Thread: SN74AUP1G08, SN74AHC1G08, SN74LVC1G97

Hi Team,

I notice this part have the minimum slew rate for the input signal.

My Question is:

1. why we have this kind of requirement? what architechture we are?

2.If the customer can't meet this kind of requirement, what typical waveform they would observe and why? there any other TI product which has lower requirement for this dt/dv spec? the customer's dt/dv spec is 20us/V(there are no obvious issue there, but it can't meet our datasheet spec), do you have any recomendation as an alternative of SN74LVC1G08 to solve this issue?