This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello, I have downloaded the model from the TI product page, and import it in OrCAD (import/PSpice/.cir, then open the .olb through the library). The simulation doesn't complete and indicates the error "Values must be monotonic increasing". I have searched in this forum and used more recent .cir from below threads:
But I still have the same message: "Values must be monotonic increasing"
Can you provide some guidance to solve the issue?
Hi Jerome,
Sorry for the slow response on this, give me a day and I'll work with it on my own end and see what the issue is. Maybe you can attach a schematic of what you are trying to simulate?
Best,
Malcolm
Jerome,
The model appears to be working on my end. Could you please attach a schematic of what you are attempting to simulate, and describe what software you are using?
Best,
Malcolm
Hello Malcolm Lyn,
First, I have downloaded again below model from TI webpage:
SN74LVC1G125 data sheet, product information and support | TI.com
SN74LVC1G125 PSpice Model
SCEM579.ZIP (20 KB) - PSpice Model
Second, I have followed those steps to use upper model:
And the simulation is now running ! Thank you !