• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 19 subscribers
  • Views 113 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TXB0304: spec check

GARETH OU
Mastermind 9945 points
Part Number: TXB0304
Other Parts Discussed in Thread: TXU0102

Hi

Customer measurement found that U22 PIN8 has an abnormal waveform when USB is abnormal (USB_OC#_abnormal.png) U22 uses TXB0304RUTR

Changing RA43 to a smaller size (1K for testing) can solve this problem

May I ask how much should be changed to RA43 and RA44? Is there any reference material?


  • 0
    Guru 275410 points

    The TXB must not be used with strong pull-up/-down resistors (< 20 kΩ); see section 8.4.2 of the datasheet.

    For unidirectional signals, you should use a unidirectional translator like the TXU0102. Are the directions of the two GPIO signals fixed?