Tool/software:
Hi Team,
We are using the Level translator IC TXS0104EYZTR, we are facing one issue.
without clock pulse on 1.8V side, 3.3V side we are getting clock (not pulse) high 3.3V.
Our doubt is whether we need give pull up on both the sides for the SCL and SDA???
One more observation, we changes the pull up resistor from 3.3V side to 1.8V side- working fine
Again we reverted back these changes form 1.8V side to 3.3V side it is working fine.
Regards,
Sathya Priya N
