Because of the holidays, TI E2E™ design support forum responses will be delayed from Dec. 25 through Jan. 2. Thank you for your patience.

  • State
  • Locked Locked
  • Replies 0 replies
  • Subscribers 17 subscribers
  • Views 316 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[FAQ] Fixed DIR / DIR CNTRL Level-Shifters

Michael Ikwuyum
Mastermind 33765 points

FAQ: Logic and Voltage Translation > Fixed DIR / DIR CNTRL Level-Shifters >> Current FAQ

  1. [FAQ] Should I use Auto-Bidirectional level-shifters for Fixed directional applications?
  2. [FAQ] Can  I estimate Data Rate Frequency not given for my voltage level?
  3. [FAQ] Can I estimate appropriate dampening resistor value for level-shifter outputs? 
  4. [FAQ] How can I choose a high drive strength device? 
  5. [FAQ] What is the VIH / VIL required for a Schmitt-Trigger device? 
  6. [FAQ] Why is there a voltage offset at the input of the SN74AXCxTxxx device?
  7. [FAQ] How can I level shift up to 30 V?