TMDSEMU200-U: XDC200 CTI20 header part number

Pradeep Prabhu G

Hi TI support Team,

Could you please share XDC200 programmer CTI20 female header part number to select box type mating header part for our custom design or suggest any box type male header mating part to connect CTI20 connector in our custom board.

Regards,

Pradeep

over 5 years ago

0 Gus Martinez over 5 years ago

TI__Mastermind 30511 points

Hi Pradeep,

Refer to the following page for details. There are some board header recommendations in that page.

https://software-dl.ti.com/ccs/esd/documents/xdsdebugprobes/emu_jtag_connectors.html

For the cTI 20-pin connector, you need a male connector that can mate with the 0.05" (1.27mm) pin pitch, 0.10" (2.54mm) row pitch connector.

Arm-based microcontrollers

Arm-based microcontrollers forum

TMDSEMU200-U: XDC200 CTI20 header part number