Hi,
I have some doubts on GPIOs of AM2432
How many GPIOs can we defined as interrupts?
Can we hard code GPIOs as interrupts?
How the Priority of interrupts can be defined?
How fast a general GPIO can switch?
Regards
Athuljith R
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
I have some doubts on GPIOs of AM2432
How many GPIOs can we defined as interrupts?
Can we hard code GPIOs as interrupts?
How the Priority of interrupts can be defined?
How fast a general GPIO can switch?
Regards
Athuljith R
Hello Athuljith,
Technical details for GPIO and MCU_GPIO are available for review in the device Datasheet (answers for Q4) and Technical Reference Manual (answers for Q1,Q2,Q3).
The documents are linked below for easy access.
Datasheet - https://www.ti.com/lit/gpn/am2434
TRM - https://www.ti.com/lit/pdf/spruim2
Regards,
Zackary Fleenor