AM2434: when profinet/Ethernet-IP stacks working with stand-alone lwip stack will be released?

Sung-IL

Part Number: AM2434

Dear Champs,

My customer found our profinet/ethernet-IP stacks integrated lwip stack and thus these can not be linked with stand-alone lwip stack by referring below e2e.

https://e2e.ti.com/support/microcontrollers/arm-based-microcontrollers-group/arm-based-microcontrollers/f/arm-based-microcontrollers-forum/1098656/lp-am243-industrial-communication-stack-profinet-with-lwip-lp-am243

Could you please let me know if we have a schedule when new profinet/ethernet-ip stacks working with stand-alone lwip stack will be released?

"We are working to enable Profinet stack to use the stand-alone lwIP library (and not compile lwIP along with the stack library)."

Thanks and Best Regards,

SI.

over 3 years ago

0 Prasad Jondhale over 3 years ago

TI__Mastermind 27743 points

SI,

Both the experts who could support this thread are on leave so please expect delay in response. We will come back mostly on Monday. Please feel free to ping if you dont hear from us.

Thanks for understanding!

Regards,

Prasad

0 Nilabh Anand over 3 years ago in reply to Prasad Jondhale

TI__Mastermind 46714 points

Hi SI,

For EtherNet/IP, it will be available in 8.4. For Profinet, stack is going to be taken down.

Regards

Nilabh A.

Arm-based microcontrollers

Arm-based microcontrollers forum

AM2434: when profinet/Ethernet-IP stacks working with stand-alone lwip stack will be released?